PurePro M500/M500P RO Systems


PurePro® M-Series RO Systems

All M-Series are using inline cartridge filters (Disposable Filters). Standard connector 1.4″NPT for inline cartridges. From M300 ~ M800, all of them are using standard inline cartridge filters.  A high quality, but low cost system.

Easy Installation

The stylish design of the PurePro M500 system was created to fit elegantly in any kitchen environment. The economical, friendly, easy-to-install and easy-to-maintain solution to your purified water needs.

M-Series Filter Cartridges

The newly designed M-series M500 is user friendly with design simplicity in mind. It requires no tools for filter changes. Replacing the filters on this system is one of the easiest to do. Inline filters make cartridge replacement fast, clean & easy, without contact with used filter material. No Mess, No Fuss with these filters just remove the old ones and install the new filters. This space saving allows maximum use of your under counter space.

Model Number
M500: M500 RO system
M500P: M500 with Booster Pump

M500 system comes complete with a pressure 3.2 gallons water storage tank, U.S.made membrane and all the necessary fittings, installation kits, extra color 1/4″ tubing, and a European Design chrome faucet


3.2 Gallons NSF Standards Water Storage Tank.
Complete 5 stage reverse osmosis water filter system.
Use inline filter design makes filter changes fast, clean and easy.
Automatic Shut-off Valve.
Flow Restrictor, Stainless Steel Check Valve.
Chrome Faucet (FC101).
Feed water connector & deliver valve.
Drain Saddle Valve.
Completely Assembled & Water leaking testing.
100% Factory Tested and Sterilized Ready for Installation.
M500P: Booster Pump.

Reverse Osmosis is the most powerful method of filtration used today !

Reverse Osmosis (RO) is recognized as one of the best available technologies for producing best quality drinking water. It’s also the same method used by many bottled water companies to make safe and great tasting water.  No other home water treatment system can offer you as much protection and reliability.

Reverse Osmosis (RO) drinking water systems include mechanical filtration to remove particles, carbon absorption and absorption to remove chloring, taste, odor and chemical contaminants, as well as membrane separation down to 0.0001 microns. RO membranes remove dissolved solids at the ionic level. No other purification system can provide better removal.

5 filtering stages in RO system

(Stage 1) 5 Micron Sediment Filter: PurePro® M-Series, KF5633-PP5 (In-Line 2,5″, NPT)
With only five micron rating. It is effective in removing dirt, rust and sand particles.
(Stage 2) Carbon GAC Filter: PurePro® M-Series, KF5633-GAC (In-Line 2,5″, NPT)
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color.
(Stage 3) 1 Micron Sediment Filter: PurePro® M-Series, KF5633-PP1 (In-Line 2,5″, NPT)
With only 1 micron rating, provides effective filtration to protect your membrane. It provides for improved membrane performance up to 95% of TDS rejection.
(Stage 4) Reverse Osmosis Membrane: PurePro® TW30-1812-50, TLC50 (50GPD)
A thin film composite (TFC) high quality membrane that processes 50 gallons per day. It remove the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium.
(Stage 5) Post Carbon Filter: PurePro® Post Carbon Filter, F6 (In-Line 2″, NPT)
This carbon post filter removes objectionable tastes and odors to enhance the quality of your drinking water. We are using NSF approved post carbon to guarantee the taste of water.

Technical data

Membrane performance: 50 GPD / 189 LPD
M500P Booster Pump: DC24V/1.2A
M500P Transformer: 230/24V
Operation pressure: M500 50-100 psi, M500P 5-80 psi
Dimensions: (cm) 31,5 (L) x 28 (H) x 20 (W) – system, (cm) 28 (L) x 28 (W) x 35 (H)- tank
Weight: M500 6 kg – system, 4 kg – tank, M500P 8 kg – system, 4 kg – tank
Tank capacity: 3,2 GAL